The Edsel of Aviation Engines:
LYCOMING AT OVERHAUL PARTS REPLACEMENT LIST - 0-320 H2AD Lycoming engines are the culmination of hundreds of parts improvements made over the last six decades. Behringer xenyx x2442usb drivers for mac. Date released: october 2006 title: o-320 operator's manual document part number: 60297-30 models affected: o-320-a1a, o-320-a1b, o-320-a2a, o-320-a2b, o-320-a2c, o-320-a3a, o-320-a3b, o-320-a3c, o-320-b1a, o-320-b1b, o-320-b2a, o-320-b2b, o-320-b2c, o-320-b3a, o-320-b3b, o-320-b3c, o-320-d1a, o-320-d1d, o-320-d1f, o-320-d2a, o-320-d2b, o-320-d2c, o-320-d2g, o-320-d2j. LYCOMING OPERATOR'S MANUAL ATTENTION OWNERS, OPERATORS, AND MAINTENANCE PERSONNEL This operator�s manual contains a description of the engine, its specifications, and detailed information on how to operate and maintain it. Such maintenance procedures that may be required in conjunction with periodic inspections are also included.
Not EVERY Idea can be a Winner
By Jim Cavanagh
Sitting around at AirVenture earlier this year, I spent some time with Ed Kollin, the formulation chemist who developed CamGuard. We were talking about everything (but CamGuard), when I asked him about the infamous Lycoming O-320-H2AD engine. 'What was the real problem with this engine?' I asked, 'Was it operator error or a design thing?'
Kollin's response was an interesting look into the industry at that level, and his story, combined with a couple missteps at Cessna and accounts from the late Bill Thompson, dovetailed into the following tale. Enjoy!
If you own, have ever owned, or think one day you may own an airplane with the Lycoming O-320-H2AD engine, you might want to read this. Of course, nowadays most of these engines have been modified to work well or have been 'fixed' chemically if you use the Lycoming additive or CamGuard. Still, you might wonder: Why in the world does Lycoming need a 'fix' for one of their engines? The answer is a combination of marketing, costs, and physics; and sadly, the only ones who really paid the price for it all were the owners.
In 1968, Cessna was purchased by Textron, and an engine change was in its future. The company began using the Lycoming O-320-E2D, which was 5 hp more powerful than the Continental O-300 and it cruised 1 mph faster—a marketing coup! The engine was used for nine years, but when Cessna introduced the camber-lift wing in 1973, cruise speed went in the wrong direction—not a good thing for sales.
Well, about this time, we were also beginning to see the demise of 87 octane avgas, a.k.a. the red juice. Refineries were looking at bottom lines and were not making enough fuel for the profits they wanted. An economical out was to take a cheaper fuel and add Tetra Ethyl Lead to create 100LL. Heads soon got together and figured that if the 100LL was going to be the fuel of the future, and that higher compression engines not only could burn 100LL, but hadto burn 100LL, that it might be time to develop an engine that did not foul plugs like the older Lycomings did with the leaded fuel. Plus, if the engine could be higher compression, then it could be more powerful and make up for the speed loss of the camber-lift wing, thus killing two birds with one stone. So, if two birds, why not three? Why not design an engine that would be cheaper to build and maintain too! And that's just what they did…sort of.
In 1977, the Cessna 172/100 (for 100 octane fuel) was introduced with the O-320-H2AD engine, boasting 160 hp. Textron had bought Cessna and already owned Lycoming, so they wanted to maximize profits by building a cheaper engine to put on an airplane that already had a market and price point. The engine, if you ever see one, looks totally different from the normal Lycoming O-320. It's tall and skinny, has very simple sections with lots of nuts and bolts holding it together, and (most of the time) it's painted a distinctive sky blue. Why blue? Marketing? Distinction? Who knows? Regardless, the result is an engine that not only looks sort of cheap, but is very, very different from what you're used to. Of course, the new design also boasted those extra 10 ponies; and, if they had kept the weight the same, the performance would have been impressive.
So, Lycoming 'successfully' designed an engine that could be more easily maintained. Unfortunately, even though the cam and lifters could be serviced easier, little did they know that they would have to be serviced a lot more often!
Why? To reduce costs, Lycoming used different metals for the cam and lifters. The lifters were not only made of polished cast iron, but they were changed to a barrel style, as opposed to the more traditional 'mushroom' style. They also reduced the width of the cam lobe. As the name implies, the mushroom design meant that the lifter had a head/face that was considerably larger in diameter than the body, like a 'T.' What they knew, but maybe didn't realize, was that the dynamics of the cam lobe/lifter face are such that well over 100,000 psi of pressure is placed on the lifter face when the apex of the cam lobe reaches the lifter face. This kind of pressure creates heat.
We've been told that there's always a barrier of oil between metal surfaces in our engines. Well, not between the cam lobe and lifter. Sure, there's boundary oil—that is, until the apex of the lobe swipes the face, at which point all oil is squeezed out and there is metal-to-metal contact. This contact is very, very fleeting, and as soon as the lobe moves off, the pressure, ergo the temperature, begins to dissipate.
Engineers design an engine so that the high temperature is dealt with in two ways: by the surface area of the contact and the hardness of the metals that make contact. They accomplish this by hardening the surfaces (Rockwell Grading system). On all other aircraft engines, the surface area is designed to be rather generous. On the -H2AD, for cost purposes, this surface is minimal. In fact, it's so minimal that any lessening of the surface or any defect in the interface, caused the area to be below the minimum threshold. The result is that any deformation of the lifter face or the cam lobe, including a speck of corrosion as small as a pin, causes an almost immediate process that rapidly destroys the part. This is called spalling. The result of a bad lifter face or lobe is that a cylinder will not operate properly because the valves have gotten out of time or tolerance. It creates a roughness that only replacement of the cam and lifters can fix.
Soon after pilots began complaining of failing cams and lifters, Lycoming began using an additive. The problem was approached similar to zinc in the old flat tappet cars. The Lycoming additive, LW-16702, uses chemistry to create a barrier between the two parts, easing the metal-to-metal contact and reducing wear (FAA AD 80-04-03). Comply with the AD and the engine is fixed. Note, however, there is no anti-corrosion chemistry in the Lycoming additive, unlike Shell's 100 Plus oil, which has this additive pre-blended.
The next fix was a little bit wider camshaft lobe. The 'T' mod was then developed, modifying the case so that larger diameter lifters (from .873 dia. to .950) could be installed. This did give them more surface area, but required splitting the case and some extensive work by Divco or other crankcase companies, so it was cost prohibitive for many private owners. Still, it's a shame that after just three or four hundred hours the owners had to have new parts installed.
Lycoming had 60 variations of the O-320 engine and nearly all of them were interchangeable—except the -H model engines. They used a totally different case, camshaft, lifters, rockers and a few other parts. Cylinders were the same, but pistons were a 9.0:1 compression.
Ultimately, Cessna really took it on this chin with this engine. (And we didn't even get into the dual magneto 'issue' here. There are plenty of pro and con stories about this critter, but that wasn't the problem that got all of the attention). Every aviation writer out there was slamming the engine, and Lycoming was losing the 'bulletproof' banner it had been carrying for years. Obviously, their first slip-up was actually using the engine and getting their customers in a tizzy. However, it's interesting (and serendipitous) that it was another Cessna 'failure' that ultimately shelved the -H2AD, while it may have actually saved the venerable172!
When Cessna began developing a derivative of the 172 that was supposed to be roomier and faster, they had high hopes for a great bottom line. The 172J was to have been strutless, light, and very fast for the 150-hp engine they were planning to use. Cessna ordered 2,000 Lycoming O-320-D2J engines, with an option to buy 2,000 more. The 172J was never built; rather, it became the C-177 Cardinal.
The problem with the initial Cardinals was that they weren't as fast as they should have been. Flight Engineer, Bill Thompson, in his wonderful book Cessna: Wings for the World, wrote that the leading edges of the wings were made of aluminum skins that were too thin, and under flight loads deformed, ruining the laminar flow. Engineers did this because the airplane was getting far too heavy. The result was a gorgeous design that flew like ten pounds of broccoli! It had visual appeal, but no numbers. Ultimately, big doors and easy entry don't sell airplanes, but speed does.
The 'fix' for the Cardinal was a 180-hp engine, and suddenly Cessna had 3000, 150-hp engines, but only one model to put them in—the 172. They immediately pulled the notorious -H2ADs and began installing the unexpectedly abundant -D2Js instead. Suddenly, everyone was happy!
Lycoming's O-320-H2AD engines were only used on 172 N Models produced from 1977-1980, of which 8,331 were built.
There are still a lot of -H2AD engines left out there, many of which have moved to the Experimental side. If I had one of these engines, I would probably opt for using CamGuard rather than the Lycoming additive (regardless of the AD); simply because of the hours we are NOT flying these days and the anti-corrosion/anti-wear chemistry of the product.
Lycoming 0320 H2ad Operator's Manual Free
So, between the 'T' mod, the Lycoming additive, and CamGuard, these engines should be dependable these days. Adobe cs6 master collection serial keygen for mac. To check this, I called Bobby Merrell of Aircraft Specialties Services, an aviation machine shop that overhauls engine parts. 'Of this particular engine,' he told me, 'you'll either see a pristine, nearly perfect engine, or one that is all ate up and needs everything replaced.'
Lycoming 0320 H2ad Operator's Manual Instructions
Backing Merrell's comments, chatroom after chatroom has pilots saying that if you run the engine to temp a couple of times a week it will last forever. In fact, Ed Kollin told me that if you would start an -H2AD engine and never shut it down, while somehow keeping fresh oil in the case, it could go for 4,000 hours! Conversely, if you let this particular engine sit for extended periods it seems doomed to develop a failed cam or lifter.
What I get from these comments is that things probably haven't changed all that much. Regardless, I think an owner can be conscientious and do everything he or she can to keep the engine healthy. If you fly a lot and follow all of the instructions, you might get years of operation out of the engine. After all, the Experimental guys don't complain about them—then again, they do a lot of their own work and don't have to be as legal as we do.
This piece wasn't about how to treat an engine, or how to fly it, so much as it's a discussion of a particular engine and its place in aviation history. In short, the -H2AD is notorious: you will NOT find Superior or ECI replicating this particular design! Ford had the Edsel. Frances Ford Coppola had Heaven's Gate, Coke had New Coke, and Lycoming, builder of some of the world's best aircraft engines, had the -H2AD. Not everything can be a winner. But, hey, you could have a Mooney with a Porsche engine in it!
The Edsel of Aviation Engines:
LYCOMING AT OVERHAUL PARTS REPLACEMENT LIST - 0-320 H2AD Lycoming engines are the culmination of hundreds of parts improvements made over the last six decades. Behringer xenyx x2442usb drivers for mac. Date released: october 2006 title: o-320 operator's manual document part number: 60297-30 models affected: o-320-a1a, o-320-a1b, o-320-a2a, o-320-a2b, o-320-a2c, o-320-a3a, o-320-a3b, o-320-a3c, o-320-b1a, o-320-b1b, o-320-b2a, o-320-b2b, o-320-b2c, o-320-b3a, o-320-b3b, o-320-b3c, o-320-d1a, o-320-d1d, o-320-d1f, o-320-d2a, o-320-d2b, o-320-d2c, o-320-d2g, o-320-d2j. LYCOMING OPERATOR'S MANUAL ATTENTION OWNERS, OPERATORS, AND MAINTENANCE PERSONNEL This operator�s manual contains a description of the engine, its specifications, and detailed information on how to operate and maintain it. Such maintenance procedures that may be required in conjunction with periodic inspections are also included.
Not EVERY Idea can be a Winner
By Jim Cavanagh
Sitting around at AirVenture earlier this year, I spent some time with Ed Kollin, the formulation chemist who developed CamGuard. We were talking about everything (but CamGuard), when I asked him about the infamous Lycoming O-320-H2AD engine. 'What was the real problem with this engine?' I asked, 'Was it operator error or a design thing?'
Kollin's response was an interesting look into the industry at that level, and his story, combined with a couple missteps at Cessna and accounts from the late Bill Thompson, dovetailed into the following tale. Enjoy!
If you own, have ever owned, or think one day you may own an airplane with the Lycoming O-320-H2AD engine, you might want to read this. Of course, nowadays most of these engines have been modified to work well or have been 'fixed' chemically if you use the Lycoming additive or CamGuard. Still, you might wonder: Why in the world does Lycoming need a 'fix' for one of their engines? The answer is a combination of marketing, costs, and physics; and sadly, the only ones who really paid the price for it all were the owners.
In 1968, Cessna was purchased by Textron, and an engine change was in its future. The company began using the Lycoming O-320-E2D, which was 5 hp more powerful than the Continental O-300 and it cruised 1 mph faster—a marketing coup! The engine was used for nine years, but when Cessna introduced the camber-lift wing in 1973, cruise speed went in the wrong direction—not a good thing for sales.
Well, about this time, we were also beginning to see the demise of 87 octane avgas, a.k.a. the red juice. Refineries were looking at bottom lines and were not making enough fuel for the profits they wanted. An economical out was to take a cheaper fuel and add Tetra Ethyl Lead to create 100LL. Heads soon got together and figured that if the 100LL was going to be the fuel of the future, and that higher compression engines not only could burn 100LL, but hadto burn 100LL, that it might be time to develop an engine that did not foul plugs like the older Lycomings did with the leaded fuel. Plus, if the engine could be higher compression, then it could be more powerful and make up for the speed loss of the camber-lift wing, thus killing two birds with one stone. So, if two birds, why not three? Why not design an engine that would be cheaper to build and maintain too! And that's just what they did…sort of.
In 1977, the Cessna 172/100 (for 100 octane fuel) was introduced with the O-320-H2AD engine, boasting 160 hp. Textron had bought Cessna and already owned Lycoming, so they wanted to maximize profits by building a cheaper engine to put on an airplane that already had a market and price point. The engine, if you ever see one, looks totally different from the normal Lycoming O-320. It's tall and skinny, has very simple sections with lots of nuts and bolts holding it together, and (most of the time) it's painted a distinctive sky blue. Why blue? Marketing? Distinction? Who knows? Regardless, the result is an engine that not only looks sort of cheap, but is very, very different from what you're used to. Of course, the new design also boasted those extra 10 ponies; and, if they had kept the weight the same, the performance would have been impressive.
So, Lycoming 'successfully' designed an engine that could be more easily maintained. Unfortunately, even though the cam and lifters could be serviced easier, little did they know that they would have to be serviced a lot more often!
Why? To reduce costs, Lycoming used different metals for the cam and lifters. The lifters were not only made of polished cast iron, but they were changed to a barrel style, as opposed to the more traditional 'mushroom' style. They also reduced the width of the cam lobe. As the name implies, the mushroom design meant that the lifter had a head/face that was considerably larger in diameter than the body, like a 'T.' What they knew, but maybe didn't realize, was that the dynamics of the cam lobe/lifter face are such that well over 100,000 psi of pressure is placed on the lifter face when the apex of the cam lobe reaches the lifter face. This kind of pressure creates heat.
We've been told that there's always a barrier of oil between metal surfaces in our engines. Well, not between the cam lobe and lifter. Sure, there's boundary oil—that is, until the apex of the lobe swipes the face, at which point all oil is squeezed out and there is metal-to-metal contact. This contact is very, very fleeting, and as soon as the lobe moves off, the pressure, ergo the temperature, begins to dissipate.
Engineers design an engine so that the high temperature is dealt with in two ways: by the surface area of the contact and the hardness of the metals that make contact. They accomplish this by hardening the surfaces (Rockwell Grading system). On all other aircraft engines, the surface area is designed to be rather generous. On the -H2AD, for cost purposes, this surface is minimal. In fact, it's so minimal that any lessening of the surface or any defect in the interface, caused the area to be below the minimum threshold. The result is that any deformation of the lifter face or the cam lobe, including a speck of corrosion as small as a pin, causes an almost immediate process that rapidly destroys the part. This is called spalling. The result of a bad lifter face or lobe is that a cylinder will not operate properly because the valves have gotten out of time or tolerance. It creates a roughness that only replacement of the cam and lifters can fix.
Note: The O-320-H2AD featured a less expensive, flat metal rocker. It wasn't talked about much at the time, but mechanics have since come to realize that the rockers used in the Lycoming engine are the exact same rockers used by Ford in their 351C engine! These have millions of hours on them and have had no problems, so a lot of the Experimental guys use them at about $10 each, as opposed to around $150 per for the Lycoming parts. There are also aftermarket Roller rockers available (like those pictured here). The aviation versions are supposed to give the engine an extra 5 hp.Soon after pilots began complaining of failing cams and lifters, Lycoming began using an additive. The problem was approached similar to zinc in the old flat tappet cars. The Lycoming additive, LW-16702, uses chemistry to create a barrier between the two parts, easing the metal-to-metal contact and reducing wear (FAA AD 80-04-03). Comply with the AD and the engine is fixed. Note, however, there is no anti-corrosion chemistry in the Lycoming additive, unlike Shell's 100 Plus oil, which has this additive pre-blended.
The next fix was a little bit wider camshaft lobe. The 'T' mod was then developed, modifying the case so that larger diameter lifters (from .873 dia. to .950) could be installed. This did give them more surface area, but required splitting the case and some extensive work by Divco or other crankcase companies, so it was cost prohibitive for many private owners. Still, it's a shame that after just three or four hundred hours the owners had to have new parts installed.
Lycoming had 60 variations of the O-320 engine and nearly all of them were interchangeable—except the -H model engines. They used a totally different case, camshaft, lifters, rockers and a few other parts. Cylinders were the same, but pistons were a 9.0:1 compression.
Ultimately, Cessna really took it on this chin with this engine. (And we didn't even get into the dual magneto 'issue' here. There are plenty of pro and con stories about this critter, but that wasn't the problem that got all of the attention). Every aviation writer out there was slamming the engine, and Lycoming was losing the 'bulletproof' banner it had been carrying for years. Obviously, their first slip-up was actually using the engine and getting their customers in a tizzy. However, it's interesting (and serendipitous) that it was another Cessna 'failure' that ultimately shelved the -H2AD, while it may have actually saved the venerable172!
When Cessna began developing a derivative of the 172 that was supposed to be roomier and faster, they had high hopes for a great bottom line. The 172J was to have been strutless, light, and very fast for the 150-hp engine they were planning to use. Cessna ordered 2,000 Lycoming O-320-D2J engines, with an option to buy 2,000 more. The 172J was never built; rather, it became the C-177 Cardinal.
The problem with the initial Cardinals was that they weren't as fast as they should have been. Flight Engineer, Bill Thompson, in his wonderful book Cessna: Wings for the World, wrote that the leading edges of the wings were made of aluminum skins that were too thin, and under flight loads deformed, ruining the laminar flow. Engineers did this because the airplane was getting far too heavy. The result was a gorgeous design that flew like ten pounds of broccoli! It had visual appeal, but no numbers. Ultimately, big doors and easy entry don't sell airplanes, but speed does.
The 'fix' for the Cardinal was a 180-hp engine, and suddenly Cessna had 3000, 150-hp engines, but only one model to put them in—the 172. They immediately pulled the notorious -H2ADs and began installing the unexpectedly abundant -D2Js instead. Suddenly, everyone was happy!
Lycoming's O-320-H2AD engines were only used on 172 N Models produced from 1977-1980, of which 8,331 were built.
There are still a lot of -H2AD engines left out there, many of which have moved to the Experimental side. If I had one of these engines, I would probably opt for using CamGuard rather than the Lycoming additive (regardless of the AD); simply because of the hours we are NOT flying these days and the anti-corrosion/anti-wear chemistry of the product.
Lycoming 0320 H2ad Operator's Manual Free
So, between the 'T' mod, the Lycoming additive, and CamGuard, these engines should be dependable these days. Adobe cs6 master collection serial keygen for mac. To check this, I called Bobby Merrell of Aircraft Specialties Services, an aviation machine shop that overhauls engine parts. 'Of this particular engine,' he told me, 'you'll either see a pristine, nearly perfect engine, or one that is all ate up and needs everything replaced.'
Lycoming 0320 H2ad Operator's Manual Instructions
Backing Merrell's comments, chatroom after chatroom has pilots saying that if you run the engine to temp a couple of times a week it will last forever. In fact, Ed Kollin told me that if you would start an -H2AD engine and never shut it down, while somehow keeping fresh oil in the case, it could go for 4,000 hours! Conversely, if you let this particular engine sit for extended periods it seems doomed to develop a failed cam or lifter.
What I get from these comments is that things probably haven't changed all that much. Regardless, I think an owner can be conscientious and do everything he or she can to keep the engine healthy. If you fly a lot and follow all of the instructions, you might get years of operation out of the engine. After all, the Experimental guys don't complain about them—then again, they do a lot of their own work and don't have to be as legal as we do.
This piece wasn't about how to treat an engine, or how to fly it, so much as it's a discussion of a particular engine and its place in aviation history. In short, the -H2AD is notorious: you will NOT find Superior or ECI replicating this particular design! Ford had the Edsel. Frances Ford Coppola had Heaven's Gate, Coke had New Coke, and Lycoming, builder of some of the world's best aircraft engines, had the -H2AD. Not everything can be a winner. But, hey, you could have a Mooney with a Porsche engine in it!
Lycoming 0 320
Download >> Download Lycoming 0-320 maintenance manual
Read Online >> Read Online Lycoming 0-320 maintenance manual
lycoming 0-320-e2d
lycoming o-320 parts manual
lycoming o-320 overhaul
lycoming o-320-h2ad manual
lycoming o-320 tbo
lycoming o-320 torque values
lycoming o-320 oil pressure adjustment
lycoming o-360 parts manual
SECTION 5. MAINTENANCE PROCEDURES. The procedures described in this section are provided to guide and instruct personnel in performing such maintenance operations that may be required in conjunction with the periodic inspections listed in the preceding section. No attempt is made to include repair and OVERHAUL MANUAL. TEXTRON LYCOMING DIRECT DRIVE AIRCRAFT ENGINES. TO THE OWNER OF THIS MANUAL. IN ADDITION TO THIS MANUAL AND SUBSEQUENT REVISIONS, ADDITIONAL. OVERHAUL AND REPAIR INFORMATION IS PUBLISHED IN THE FORM OF SERVICE. BULLETINS AND SERVICE recipients should remove all previous Table of Limits material from the Overhaul Manual and discard. Additional copies of this 0-320-H (76 Series). G. O, IO, LIO, AEIO-320. G1 o, IO-320 With Gov. at Front. (0-320-ElF, -E1J, -D1F & IO-320-D1B). G2. AIO-320. J. 0-340. Y. VO, IVO-360. S. 0, IO, LIO, HIO, LHIO, TO, TIO, AEIO- Tweet Download PDF - See full screen Report a web site issue Report a copyright issue Download PDF Tweet. 30 Dec 2006 the engine or parts repaired or replaced. Avco Lycoming will also reimburse you for the costs for labor in con- nection with the repair or replacement as provided in Avco Lycoming's then current Removal and Installation. Labor Allowance Guidebook. Any engine or part installed during such repair or LYCOMING OPERATOR'S MANUAL. 0-320 & IO-320 SERIES SECTION 3. SECTION 3. OPERATING INSTRUCTIONS. I. GENERAL. Close adherence to these PERHAPS NO OTHER ITEM OF. ENGINE OPERATION AND MAINTENANCE CONTRIBUTES QUITE. SO MUCH TO SATISFACTORY PERFORMANCE AND Modifications and repair procedures are contained in Lycoming overhaul manuals; maintenance personnel should refer to these for such procedures. SAFETY WARNING. Neglecting to follow the operating instructions and to carry out periodic maintenance procedures can result in poor engine performance and power loss. LYCOMING. 0-320-B and D SERIES PARTS CATALOG. HIGH COMPRESSION: WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE. INTRODUCTION. This illustrated parts catalog This catalog, when used in conjunction with the appropriate overhaul manual, shall be used for parts identifica- tion only. Under no 7 Dec 1974 Direct Drive. 60294-7-9. Overhaul Manual. 60294-7. December 1974. The page(s) furnished herewith are intended to replace the corresponding page(s) of the pub ication indicated above. Previous revisions to this publication. This revision consists of. April 1966. June 2002. 5-3, 5-6; 8-5. 7-10B. July 1967. Lycoming O320-H2AD 76 Overhaul Manual - Free download as PDF File (.pdf), Text File (.txt) or read online for free. Overhaul Manual. AVCO .·LVCOIVllNG - ,. 76 Series Engines .·.J. Approved by F.A.A . .L:1/AVCC LYCOMING WILLIAMSPORT DIVISION . Parts catalog for the 0-320-H 76 series engines may be ordered
Minolta ms6000 manual, Cornell notes pdf, International guideline library, La voz del sintoma adriana schnake pdf, .